Dsp Surround Simulation - Denon AVR-686S Operating Instructions Manual

Basic Operation
SURROUND
MODE
SURROUND
ENTER
PARAMETER
CURSOR F CURSOR G

DSP surround simulation

2 To operate the surround mode and the surround
parameters from the remote control unit
1
Select the surround mode for the input channel.
(Remote control unit)
The surround mode switches in the following order each
time the DSP SIMULATION button is pressed:
MONO MOVIE ROCK ARENA
MATRIX VIDEO GAME JAZZ CLUB
2
SURROUND PARAMETER
Press the
enter the surround parameter setting mode.
The surround parameter switches in the following order
each time the SURROUND PARAMETER button is pressed for
the different surround modes.
• When the MONO MOVIE, ROCK ARENA, JAZZ CLUB
and VIDEO GAME mode:
ROOM SIZE EFFECT LEVEL
DEFAULT
• When the MATRIX mode:
DELAY
DEFAULT
• When the VIRTUAL mode:
TONE DEFEAT
If you do want the bass and treble to be adjusted, turn off
the tone defeat mode.
3
SURROUND PARAMETER
Press the
select the various parameters.
4
CURSOR F F
Press the
various parameters.
• ROOM SIZE setting:
• EFFECT LEVEL setting
• DELAY TIME setting
button to
TONE DEFEAT
SURROUND BACK
TONE DEFEAT
SURROUND BACK
DEFAULT
button to
G G
or button to set the
5
• When making parameter settings, the display will return to the
26
ENGLISH
• D. COMP. setting
This parameter is displayed during DOLBY DIGITAL playback.
• LFE setting
This parameter is displayed during DOLBY DIGITAL and DTS
playback.
• TONE DEFEAT setting
• SURROUND BACK SPEAKER setting
This parameter is displayed during DOLBY DIGITAL playback.
• DEFAULT setting
Select "YES" to reset to the factory defaults.
ENTER
Press the button to finish the surround
parameter mode.
regular condition several seconds after the last button was
pressed and the setting will be completed.
ENGLISH
Basic Operation