Symbol and character sets (For HL-2070N)
For the HP LaserJet, IBM Proprinter XL, and EPSON FX-850 emulation modes, you can select the symbol
and character sets using a Web browser or the Remote Printer Console software.
How to use the Web browser
To use the Web browser, follow the steps below.
1
Type http://printer's IP address/ into your browser.
For example: http://192.168.1.2/ (if the printer's IP address is 192.168.1.2)
2
Click Printer Settings.
3
Enter a user name and a password. The default User Name is admin and the default Password is
access.
4
Click OK.
5
Select the HP LaserJet, IBM Proprinter XL or EPSON FX-850 tab and click Font Setup.
6
Select a symbol set you want to use from the Symbol Set list box.
How to use the Remote Printer Console
To use the Remote Printer Console software, follow the steps below.
®
For Windows
1
Insert the CD-ROM into your CD-ROM drive and close the opening screen when it appears.
2
®
Open Windows
Explore and select the CD-ROM drive.
3
Double-click the RPC folder.
4
Refer to the RPC_User's_Guide.pdf for how to install and use the Remote Printer Console.
®
For Macintosh
1
Insert the CD-ROM into your CD-ROM drive. Double-click the HL2000 icon on the desktop.
2
Double-click the RPC folder.
3
Refer to the RPC_User's_Guide.pdf for how to install and use the Remote Printer Console.
Symbol and character sets list
OCR symbol sets
When you choose the OCR-A or OCR-B font, the matching symbol set is always used.
OCR A (0O)
OCR B (1O)
Appendix
A
A - 9