Table of Contents
Advertisement
Printer Parts
Printer parts
Front
a. Top Cover
Open this cover to install the Printhead, load paper, and remove any jammed paper from inside the
printer as needed. (→P.10)
b. Cutter Groove
Paper is cut (using the cutter or manually with scissors) over this groove.
c. Ejection Guide
Guides printed documents as they are ejected. Open this guide when loading a roll.
d. Roll Holder Slot
Slide the Roll Holder into this slot.
e. Roll Holder
Load the roll on this holder.
f. Ejection Support
Prevents printed documents from winding around the Roll Holder or Paper Feed Slot.
g. Output Stacker
A cloth tray that catches ejected documents. (→P.18)
h. Paper Feed Slot
When loading a roll, insert the edge of the roll paper here.
i. Holder Stopper
Secure the roll on the Roll Holder with this part.
j. Ink Tank Cover
Open this cover to replace an Ink Tank. (→P.12)
k. Control Panel
Use this panel to operate the printer and check the printer status. (→P.14)
Printer parts
Printer Parts 7
Advertisement
Table of Contents
