Installation Of Battery For Winding The Lower Thread - Toyota SP10 Instruction Manual

Sewing preparations

• Installation of battery for winding the lower thread

A battery is supplied as one of the
accessories.
Before winding the lower thread, install it in
the battery holder on back of sewing machine.
When the machine is
Attention
not used for a extended
period remove the battery.
1
Pull the battery holder cover out as the
arrow.
2
Install the battery while confi rming polarity
of it.
Attach battery holder cover.
Note: Refer to page 42, 43 when
purchasing or changing batteries.
3
Make sure that the thread winding spindle
rotates by turning the thread winding switch
on by pushing in the direction of arrow.
Note: Thread winding spindle rotates
while pushing the switch to the
left.
Battery holder cover
Thread winding switch
Battery holder
13