Audio Setup; Speaker Setup; Input Mode - Denon S-102 Owner's Manual

AUDIO SETUP

Make settings for audio playback.
F Menu screen F
a SPEAKER SETUP
Make detailed speaker settings.
CHANNEL LEVEL
Listening to the test tones at the listening position, adjust the level
of the speakers for the different channels so that the volume level
sounds the same from all speakers.
[Selectable items]
TEST TONE
: Output test tone.
FRONT LCH
: Output test tone from front left speaker.
FRONT RCH
: Output test tone from front right speaker.
SUBWOOFER
: Output test tone from subwoofer.
• The volume can be adjusted between the range of -12dB to +12dB.
• When "TEST TONE" was selected, the test tones are output in
intervals of 4 seconds for the first two cycles, 2 seconds from the
third cycle on, in the order shown below.
Front right
Front left
Subwoofer
DISTANCE
Set distance from listening position to speakers.
[Selectable items]
DISTANCE
: Select unit for distance.
FRONT LCH
: Set distance from listening position to front left
speaker.
FRONT RCH
: Set distance from listening position to front right
speaker.
SUBWOOFER
: Set distance from listening position to subwoofer.
DEFAULT
: Press the ENTER button to return to the default.
s INPUT MODE
Make input mode and decode mode settings for this
source.
[Selectable items]
AUTO
: Detect type of digital input signal and decode and play
automatically.
DTS
: Decode and play only DTS input signals.
PCM
: Decode and play only PCM input signals.
ANALOG
: Play only signals from analog input.
ENGLISH