www.dexpress.com
This Data Sheet Includes Information On
Maytag
•
Product Model Number (s):
24" Single Wall Ovens:
CWE4800ACB, CWE4800ACE and CWE4200ACB
•
Dimensions (Actual Size)
Cutout height:
Minimum cabinet width:
Minimum cabinet depth:
Recommended cutout location from floor :
Distance from face of cabinet to
outer edge of open door (Door swing):
Distance from face of cabinet to
front of closed door handle:
Overall unit width:
Overall unit height:
Penetration into cabinet:
Oven overlap distances when using
cutout dimensions listed above:
Top overlap:
Bottom overlap:
Right side overlap:
Left side overlap: 15/16"
•
Additional Information
• NOT approved for undercounter installation.
• Cutout in cabinet should be level and straight. There
are no provisions to level the unit after it is installed.
• Construct 5/8" minimum plywood floor flush with
bottom of opening. Floor must be level and straight and
capable of supporting 140 lbs.
• A three-wire, single phase, A.C. 120/208-240 volt,
60Hz cycle electrical system protected by a 30 amp
fuse or comparable circuit breaker must be provided .
7/8" O.D. flexible cable 4 feet long is furnished by
manufacturer. Mount junction box in area under
plywood floor if adequate lower cabinet space is
available. Locate 1 1/4" conduit access hole in the
back right hand side of the plywood floor.
• For European style cabinets (flush front) the required
clearance for operation of the oven door is a minimum
spacing of 1" between the cutout and the door, hinge or
drawer of the cabinet.
• CWE4800ACB and CWE4200ACB : Black.
• CWE4800ACE : Monochromatic White.
See page 2 for additional information
Subject to change without notice. This system is designed to
be updated daily if necessary. Dimension Express is not
responsible for use of superseded, voided, or outdated data
sheets. Because of the difficulty or impracticability of deter-
mining actual damages, liability of Dimension Express shall
not exceed $50.00.
Copyright © Dimension Express, 2002.
• NEVER reuse Data Sheets. Data Sheets are subject to change without
notice. Dimension Express is a FREE service bureau and is updated daily,
it makes far more sense to spend the time necessary to request new Data
Sheets for each project, as opposed to the problems, time, costs, and risks
associated with reusing old Data Sheets.
DIMENSION EXPRESS
•
•
Cutout width:
22"
28 11/16"
24"
24"
33 1/4"
21 3/8"
2 9/16"
23 7/8"
29 5/8"
22 5/8"
13/16"
0"
15/16"
•
214
Cabinet Opening
(not to scale)
Provide for
120/208-240 volt
electrical
connection in this
area.
22 5/8"
2 9/16"
• Call Dimension Express if you have any questions at (775) 833-3633 •
• Always refer to a current Code at a Glance or manufacturer directory •
• Data Sheet codes change on the first of odd numbered months at 12:01am •
Fax on Demand (775) 833-3600
24"
22"
24"
28 11/16"
33 1/4"
29 5/8"
23 7/8"
BN356 • A214B276 • • 032603 • 95653 • 76241
Overall Dimensions
(not to scale)