Setting The Tone Control; Adjusting The Speaker Volume; Using The Fader Function - Denon AVR-2307CI Operating Instructions Manual

Basic Operation

Setting the tone control

Adjust the bass and treble to suit your tastes.
¢ Adjusting the tone
1
SURROUND PARAMETER
Press .
2 D D H H
Press to select "TONE", then press
In the direct mode, "TONE" cannot be selected.
3
G G
Press to select "OFF".
4
D D H H
Press to select "Bass" or "Treble", then press
G G
to set the level.
Can be adjusted within the range of –6 dB to +6 dB.
5
ENTER SURROUND PARAMETER
Press or
1
2
3
¢ When you do not want to adjust the tone
Set "Tone Defeat" to "ON" at step 3 in "Adjusting the
tone".

Adjusting the speaker volume

1
[CH SELECT]
Press
F F
.
2 D D H H
[CH SELECT]
Press or
The settable speaker switches each time this button is pressed.
3
[F F G G ]
Press to adjust the volume.
F F
The SW channel level can be turned off by decreasing it one step
from –12.0 dB.
OFF ´ –12.0 dB ´ +12.0 dB
.
1
• "SB" when surround back speaker set to "1spkr". Not displayed
when "None" set.
.
to select the speaker.
36
ENGLISH

Using the fader function

With this function, the volume of all the front side speakers or all the
rear side speakers can be adjusted (attenuated) at once.
1
[CH SELECT]
Press .
2
D D H H [CH SELECT]
Press or to select "Fader".
3 [F F ]
Press to attenuate the volume of all the front side
[G G ]
speakers, to attenuate the volume of all the rear
side speakers.
The fader function does not affect the subwoofer.
It is possible to adjust so that the volume of the speaker whose
volume is the lowest is –12.0 dB.
2
3
ENGLISH
Basic Operation