Zone2 Setup; Lch Level; Rch Level; Volume Limit - Denon AV SURROUND RECEIVER AVR-788 Owner's Manual

Zone2 Setup

Make settings for audio playback in a ZONE2 system.
F Menu screen F
2.Manual Setup
2-4.Zone2 Setup
1.Speaker Setup
2.HDMI Setup
Level Lch
3.Audio Setup
4.Zone2 Setup
Vol.Limit

5.Option Setup

Power On Lev.: Last
Mute Lev.
a Lch Level
Adjust the left channel output level.
–12dB ~ ~ +12dB
0dB
[Variable range]
s Rch Level
Adjust the right channel output level.
–12dB ~ ~ +12dB
[Variable range] 0dB
d Volume Limit
Make a setting for maximum volume.
[Selectable items]
OFF
: Do not set a maximum volume.
–20dB
: Set the maximum volume to –20 dB.
–10dB
: Set the maximum volume to –10 dB.
0dB
: Set the maximum volume to 0 dB.
f Power On Level
Define the volume setting that is active when the power is turned
on.
[Selectable items]
Last
: 0dB
Rch : 0dB
– – –
: OFF
: Full
–70dB ~ +18dB
g Mute Level
Set the amount of attenuation when muting is on.
[Selectable items]
Full
: The sound is cut off entirely.
–40dB
: The sound is attenuated by 40 dB.
–20dB
: The sound is attenuated by 20 dB.
: Use the memorized setting from the last session.
: Always use the muting on condition when power
is turned on.
: Set the volume level when the power is turned on
in units of 1 dB.
Option Setup
Make various other settings.
F Menu screen F
2.Manual Setup
2-5.Option Setup
1.Speaker Setup

1.Amp Assign

2.HDMI Setup
2.Vol.Control
3.Audio Setup
3.Source Delete
4.Zone2 Setup
4.On-Screen Display
5.Option Setup
5.Quick Select Name
6.Remote ID Setup
7.Display
8.Setup Lock
Amp Assign
a
Define how the amplifier for the surround back speaker channels
is used.
The places where the surround back amplifier are used can be set
freely according to the usage environment. This makes it possible to
output sound to rooms other than the room (the main zone) where
surround playback is performed (multi-zone playback) or play the sound
with high quality using the front speakers (bi-amp connections).
[Selectable items]
7.1ch ZONE2 FrontA Bi-Amp FrontB Bi-Amp
For details, see "Amp Assign / Multi-zone Connections and Operations"
(vpage 52 ~ 54).
ENGLISH
2ch