UPnP
is short for Universal Plug and Play, which is a networking architecture that provides compatibility among networking equipment,
™
software, and peripherals. The DCS-5605/DCS-5635 is a UPnP
will be easier to configure. If you do not want to use the UPnP
UPnP
settings page under Advanced in the configuration menu. Use the following steps to enable UPnP
™
settings only if you are running Windows
Step 1 - Go to Start > Settings > Control Panel.
Step 2 - Click Add or Remove Programs
D-Link DCS-5605/DCS-5635 User Manual
Enabling UPnP
XP.
®
for Windows
™
enabled Camera. If your operating system is UPnP
™
functionality, it can be disabled by unselecting "Enabled" on the DDNS/
™
XP
®
enabled, the device
™
(Universal Plug and Play)
™
87