NETGEAR RNR4410 - ReadyNAS 1100 NAS Server Software Manual page 82

Select a Location on Your ReadyNAS System
Select a backup source or destination on your ReadyNAS system.You have the following
options:
• Share. Each share is listed in the source and destination drop-down lists by name.
• Volume. Each volume is listed in the source and destination drop-down lists by name. If
you are using X-RAID, your ReadyNAS system has only one volume, C. When you
choose a volume as a backup source, all shares, private home shares, and hidden
shares in the volume are backed up, each to a separate folder on the destination.
You cannot choose a volume as a backup destination. Instead, choose a share on the
volume.
• USB device. Each USB port on your ReadyNAS system is listed in the source and
destination drop-down lists. Choose a port to back up to or from the device attached to
that port. You can set up a backup even though no device is attached to the port. If no
device is attached when the backup is triggered, the backup fails.
If you want to disconnect the device when the backup completes, select Unmount USB
drive after backup.
• Private home share. Each user's private share is listed in the source and destination
menus by name.
• All home shares. Available in only the source drop-down list, this option backs up all the
private home shares, each to its own folder on the destination.
• Folder. To back up to or from only one folder, click Browse and select the folder.
Select a Remote Location
Select a location that is not on the ReadyNAS system as the source or destination for the
backup. You have the following options:
• Windows or NAS server using archive bits. Select the Remote: Windows/NAS
(Archive Bit) menu option to back up a Windows or NAS server. It is available only in the
Source drop-down list. When performing an incremental backup, the ReadyNAS system
uses a file's archive bit to determine whether to back up the file.
• In the Host field, enter the path name for the server in one of the following forms:
• //<server_name>/<path_name>
• //<IP_address>/<path_name>
• //<server_name>/<share_name>/<path_name>
• In the User name and Password fields, enter the user name and password for the
server.
• If you want to back up to a specific folder on the server, click Browse and select the
folder.
ReadyNAS Duo, NV+, and 1100
Back Up Files
82