Your Cpe At A Glance; Ports And Buttons (Back Panel); Led Description (Front Panel); Led Table & Parts List - Asus AAM6010EV-T4 User Manual

2.

Your CPE at a glance

Your CPE has many ports, switches and LEDs. Let's take a look at the different options. Depending upon
your model of CPE, your CPE may have some or all of the features listed below
2.1

Ports and buttons (Back panel)

Power is where you connect the power.
Reset Button: The reset button is used to reset the CPE to default setting. You may need to
reset the CPE if you loose network connectivity or you loose the ability to interface to the CPE
via the web interface. To reset the CPE, simply press the reset button for about 5-10 seconds
and release. After about 30 seconds the CPE will become operational.
LAN (local area network) port: connect to Ethernet network devices, such as a PC, hub,
switch, or router.
USB (universal serial port): connects to a PC's serial port. The CPE only supports Window's
based PCs via an RNDIS driver (included in the software).
DSL port: This is the WAN interface that connects directly to your phone line.
2.2

LED description (Front panel)

Power LED: On indicates that the power is supplied to the CPE
Status LED: The Status LED serves two purposes. If the LED is continuously lit, the DSL
interface is successfully connected to a device through the WAN port. If the LED is flickering,
it is an indication that the modem is training.
Activity LED: The Activity LED flash during ADSL data transfer.
LAN LED: The LAN's LED serves two purposes. If the LED is continuously lit, the Ethernet
interface is successfully connected to a device through the LAN port. If the LED is flickering, it
is an indication of any network activity.
USB LED: The USB's LED serves two purposes. If the LED is continuously lit, the USB
interface is successfully connected to a device through the LAN port. If the LED is flickering, it
is an indication of any network activity.
2.3 LED table & parts list
LED Table
The LEDs can help diagnose problems. If you are using an AAM6010EV-T4 CPE, you will
have the LEDs shown in Table 1
Label
POWER
STATUS
Color Function
On: Unit is powered on
Green
Off: Unit is powered off
Green On: ADSL link is established and active
Flashing: Trying to create an ADSL connection
5
AAM6010EV-T4 User Manual
5