Quick Setup; Figure 5.1 Dsl Auto-Connect Or Manually Vpi/Vci Input; Figure 5.2 Choose Proper Connection Type - Asus AAM6000EV User Manual

AAM6010EV-M ADSL Combo Router User's Manual
5

Quick Setup

This chapter will guide you through the steps necessary to configure your AAM6010EV-M.
1. If you enable the "DSL Auto-connect", the AAM6010EV-M will detect available VPI/VCI from
your ISP. If you don't enable it, please manually input the VPI/VCI, which are assigned by
your ISP, and click

Figure 5.1 DSL Auto-connect or Manually VPI/VCI input

2. Choose the proper connection type, like PPPoA, PPPoE, MER, IPoA or Bridging, and the
encapsulation mode (LLC/SNAP-Bridging or VC/MUX), then click
24
(Figure 5.1).

Figure 5.2 Choose proper connection type

.