Maxtor Product Support - Maxtor Fusion User Manual

MAXTOR FUSION USER'S GUIDE
Follow these precautions to prevent data loss
– Do not bump, move or drop the Maxtor Fusion while in
operation.
– Do not disconnect the power cord from your Maxtor
Fusion without first shutting it down through the
browser interface, or using the power switch on the
back of the unit.
– Do not set any liquids or drinks on or near the Maxtor
Fusion. Liquids will damage the internal electronics.
– Do not open the Maxtor Fusion enclosure. This can
cause loss of data and will void the product warranty.

Maxtor Product Support

Maxtor Corporation provides a comprehensive product
support section on its web site, including the latest soft-
ware drivers, product specifications, a complete trouble-
shooting section, and the Maxtor Knowledge Base.
Visit www.maxtorkb.com for the following information:
– Search the Knowledge Base
We store all resolved problems and FAQ's in our
knowledge base. Search by product, category,
keywords, or phrases.
– My Stuff
Login to modify or view your FAQ update
notifications or update your personal profile.
– Most Popular Help Topics
Top five most frequently asked questions.
– Software Download
Download installation and update software
for your Maxtor Fusion.
Maxtor Worldwide Support
Visit www.maxtor.com and click worldwide support or
contact us for product support outside of the USA.
Much of the information found is this User Guide can also
be found in the online help.
Navigation
Although the Maxtor Fusion interface runs from within a
browser window, it uses its own navigational buttons rather
than the forward, back, refresh buttons of your browser.
During the installation process, please refrain from using
the buttons on your browser – use the Next and Back
buttons provided in the Setup Wizard screens.
Next
Clicking on the Next button moves to the next step of the
Setup Wizard. Please note that all of the information
requested must be filled in for the setup process to be
completed successfully.
Back
Clicking on the Back button moves to the previous step of the
Setup Wizard. Information that was previously entered can
be changed by deleting or overwriting the previous entries.
Quit
Clicking on the Quit button exits the Setup Wizard. You may
quit at any time but will need to return and complete all of
the steps of the Setup Wizard before you can use Maxtor
Fusion. The information and settings you enter do not take
effect until the very end of the process.
Help
Clicking on the Help button opens a browser window with
this help file.
PAGE 2