Pausing And Resuming Replication - HP ML110 - ProLiant G5 2TB Storage Server NAS User Manual

4. Enter the IP address or hostname of a server to add as a replication target for the storage
component being configured and then click Add. The Replication Target Properties dialog box
displays.
5. Do one of the following:
• Select Configure storage automatically to allow All-in-One Storage Manager to automatically
provision disk space on the target replication system. This option is available only if the target
system is also running ASM. Click Modify storage configuration to change the target storage
configuration.
• Select Manually choose a storage path to enter a drive and folder path where data will be
replicated on the target system.
6. In the Replication set name field, accept the default name or type a new name for the replication
set.
7. From the Target network list, select a network on the replication target through which to route all
replication traffic.
8. Click OK.
9. To configure additional replication targets for this component, click Add and repeat steps 4
through 9. When configuring multiple replication targets from a single replication source, snapshots
from the replication source are replicated to all replication targets.
NOTE:
By default, compression is disabled for replication. In order to enable compression and configure other
settings such as bandwidth throttling and transmission schedules, you must use the HP StorageWorks
Storage Mirroring Management Console.
NOTE:
If replication is enabled and the replication target is an AiO, snapshots are replicated to the target side.

Pausing and resuming replication

When replication is paused, all changed data is queued on the source system. The changed data is
not replicated to the target system until replication is resumed.
1.
In the content pane, select an Exchange storage group, SQL Server database, user-defined
application, or shared folder that is currently replicating data in the content pane.
2. In the Actions pane, click Replication and then click Pause replication to <target>.
3. Click Yes to confirm the pause operation.
4. To resume replication, select the component in the content pane, and in the Actions pane, click
Replication and then click Resume replication to <target>.
5. Click Yes to confirm the resume operation.
When replication is resumed, Storage Mirroring executes a re-mirror of the data.
All-in-One Storage Manager 41