Refresh Rate; Noise Reduction - Panasonic TH-42PH11MK Operating Instructions Manual

Setup for Input Signals

Refresh Rate

This function sets the refresh rate of the display.
This menu is displayed when the input signal is 50 Hz system (50i, 50p, 25p, 24p, 24sF) of vertical scan rate.
100 Hz: Reduce screen À icker.
50 Hz: Enhance the resolution of moving images.
Note:
It is recommended to set to 100 Hz normally.

Noise reduction

Sets the following three NR (Noise Reduction) functions together.
P-NR, Mosquito NR, Block NR
Advanced NR
Sets the three NR functions separately.
1
2
P-NR: Automatically reduces unwanted picture noise.
Mosquito NR: Reduces mosquito noise around subtitles on MPEG videos.
Block NR: Reduces block noise when playing MPEG videos.
Notes:
• Noise reduction cannot be adjusted while a PC signal is being applied.
• Block NR cannot be adjusted while a HD signal is being applied.
36
Press to select "Refresh Rate".
Press to adjust.
Press to select "Noise reduction".
Press to select "Off", "Min" , "Mid" , "Max" , "Advanced".
Press to select "Advanced".
Press to enter Advanced NR.
Press to select P-NR, Mosquito NR
or Block NR.
Press to select "Off", "Min", "Mid",
"Max".
Refresh Rate
Noise reduction
[ AV ]
Advanced NR
P-NR Off
Mosquito NR Off
Off
Block NR
[ Component ]
Advanced NR
P-NR Off
Mosquito NR Off
Block NR Off
100 Hz
( )
Off
Noise reduction Advanced
[ RGB ]
Advanced NR
P-NR Off
Mosquito NR Off
Off
Block NR
[ Digital ]
Advanced NR
P-NR Off
Mosquito NR Off
Block NR Off