NETGEAR FVS336Gv1 - ProSafe Dual WAN Gigabit Firewall Setup Manual page 6

Replace the LAN address in the Portal
Layout address with the WAN address
Use the browser to connect from a PC on
the Internet to
https://83.71.251.27/portal/VPNTest
Login with one of the Usernames created
and that would be associated to the
VPNTest domain (whether part of a
group or not)
In the VPN Tunnel section click on the
icon above Connect using VPN Tunnel
The first time the connection is made a
banner will appear under the browser
Address bar – Install the Active X control
as shown and OK any subsequent dialog
box
After the Active X control is installed the
VPN tunnel can be establised
Click on the Connect using a VPN
Tunnel
The VPN Tunnel Adapter will be installed
and the VPN tunnel established
Version 1.0