Before You Begin - Nokia IP2255 - Security Appliance Installation Manual

Before You Begin

To remove, install, or replace a NIC you need the following:
To remove, install, or replace a NIC
1. Identify the location of the NIC or cover plate to remove or replace.
2. Loosen the two retaining screws on the front plate of the NIC.
Caution
3. Press the red button on the ejector and locking lever on the NIC.
Nokia IP2255 Security Platform Installation Guide
Phillips-head screwdriver
Suitable, grounded work surface on which to place the NIC
Replacement or new NIC
To avoid damage to the ejector and locking lever, loosen the two
retaining screws before you remove any NIC. One screw is located
behind the ejector and locking lever, and the other screw is on the
opposite side of the NIC.
Note
If no NIC is currently installed, remove the two retaining screws on the
blank plate that covers the slot and proceed to
The lock is released.
Removing, Installing, and Replacing NICs
step 7.
81