Security Configuration Examples - Cisco C3201FESMIC-TP= - 3201 Fast EN Switch Mobile Interface Card Expansion Module Software Configuration Manual

Protecting the Wireless LAN

Security Configuration Examples

This section contains these configuration examples:
•
•
•
•
No Security SSID Example
This example shows part of the configuration for creating an SSID called no_security_ssid, including
the SSID in the beacon, assigning it to VLAN 10, and selecting VLAN 10 as the native VLAN (as it
applies to the 2.4-GHz ([802.11b/g]) WMIC):
Dot11 ssid no_security-ssid
interface Dot11Radio0
no ip address
no ip route-cache
!
ssid no_security-ssid
!
!
speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0
rts threshold 4000
station-role root
infrastructure-client
bridge-group 1
!
interface Dot11Radio0.10
encapsulation dot1Q 10
no ip route-cache
bridge-group 10
bridge-group 10 spanning-disabled
!
interface FastEthernet0
no ip address
no ip route-cache
duplex auto
speed auto
bridge-group 1
!
interface FastEthernet0.10
duplex auto
speed auto
bridge-group 1
As it applies to the 4.9-GHz WMIC:
hostname root
!
username Cisco password 7 02250D480809
ip subnet-zero
!
no aaa new-model
Cisco 3200 Series Wireless MIC Software Configuration Guide
14
No Security SSID Example
Static WEP Security Example
EAP Authentication Security Example
WPA Security Example
vlan 10
authentication open
guest-mode
encapsulation dot1Q 10
no ip address
no ip route-cache
Administering the WMIC