NETGEAR GA621 Reference Manual page 13

Table 2-1. Software and Hardware Requirements (continued)
System Requirements
NetWare
Hardware A Pentium-based server that meets NetWare 4.2, NetWare 5.0, or NetWare 5.1
software requirements
One open 32-bit or 64-bit PCI slot
Minimum 64 MB memory
Operating System If you are using NetWare 4.2, you must have the most recent support pack
(Support Pack 8 or later).To download the latest support pack, go to the following
Novell Web page:
http://support.novell.com/products/nw42/patches.htm
For NetWare 5.0, download the most recent support pack (Support Pack 4 or
later).To download the latest support pack, go to the following Novell Web page:
http://support.novell.com/products/nw5/patches.htm
Software GA621 Fiber Gigabit Ethernet Card driver software, version 1.0 (or higher)
for NetWare, which is Included on the GA621 Fiber Gigabit Ethernet Card
(loaded during
driver installation) Driver and Documentation CD in the \Netware directory.The necessary files are:
• Ga621.lan (network device driver file)
• Ga621.ldi (information used by installation program)
Red Hat Linux
Hardware A Pentium-based server that meets Red Hat Linux 6.x or 7.x software requirements
One open 32-bit or 64-bit PCI slot
Operating System Red Hat Linux 6.0, 6.1, 6.2, 7.0 and 7.1
Software GA621 Fiber Gigabit Ethernet Card driver software, version 1.0 (or higher)
(loaded during for NetWare, which is included on the GA621 Fiber Gigabit Ethernet Card
driver installation) Driver and Documentation CD in the \Linux directory.The necessary files are:
• ga.c (Linux network OS specific module file)
• ga621.h (Driver header file)
• hsm.c (Hardware specific module file)
• hsm.h (Hardware specific module header file)
• nsm.h (HSM related data structures)
• nsmtypes.h (Definition type define)
• sp.c (Tunable parameters)
• Makefile Rules to compile and install the driver)
hardware installation 2-4