Recommended Security Deployments: Set 2 - HP J3111A - JetDirect 600N Network Card Manuallines

The TFTP configuration file points to a parameter file called "pjlprotection". This file is sent to the
printer on power-up. Here is a sample content for the pjlprotection file:
<ESC>%-12345X@PJL <CR><LF>
@PJL COMMENT **Set Password** <CR><LF>
@PJL COMMENT **& Lock Control Panel**<CR><LF>
@PJL JOB PASSWORD = 7654 <CR><LF>
@PJL DEFAULT PASSWORD = 1776 <CR><LF>
@PJL DINQUIRE PASSWORD <CR><LF>
@PJL DEFAULT CPLOCK = ON <CR><LF>
@PJL DINQUIRE CPLOCK <CR><LF>
@PJL EOJ <CR><LF>
<ESC>%-12345X

Recommended Security Deployments: SET 2

For the HP Jetdirect products that are in SET 2, the security wizard is recommended for non HP Web
Jetadmin users. The security wizard can be access via the Networking tab, "Settings" in the left-hand
navigation bar, and then the "Wizard" tab. A sample configuration is shown here:
NOTE: be sure
to use HTTPS
when
navigating to
this page.
Press the "Start
Wizard" button
to begin the
wizard.
The Security
level you want
to implement
on Jetdirect.
Here, we are
going to
choose
"Custom
Security" to
show all the
options that are
available to a
customer.
12