General Information; Pre-Disassembly Instructions; Disassembly Process - eMachines 355 Series Service Manual

General Information

Pre-disassembly Instructions

Before proceeding with the disassembly procedure, make sure that you do the following:
4. Turn off the power to the system and all peripherals.
5. Unplug the AC adapter and all power and signal cables from the system.
6. Place the system on a flat, stable surface.

Disassembly Process

The disassembly process is divided into the following stages:
 External module disassembly
 Main unit disassembly
LCD module disassembly

The flowcharts provided in the succeeding disassembly sections illustrate the entire disassembly sequence.
Observe the order of the sequence to avoid damage to any of the hardware components. For example, if you
want to remove the mainboard, you must first remove the keyboard, then disassemble the inside assembly
frame in that order.
Main Screw List
Screw
M2*7
M2*3
M3*3 Ni
M2*5
M2*3 (t=0.04)
M2*4 Ni
50
Quantity
12 86.SDE02.005
16 86.SDE02.002
8 86.SDE02.006
7 86.SDE02.004
2 86.SDE02.001
2 86.SDE02.003
Part Number
0
0
0
Chapter 3