Lexicon DC-1 Owner's Manual page 27

DC-1 Digital Controller
Input Effect Assignment
Each input has an associated effect that is automatically loaded when the
input is selected. This control allows you to assign a different effect (or no
effect) to the selected input. (When an input with no effect assigned is
selected, the DC-1 will keep the previous effect loaded.) The default
selections for input assignments:
VCR1
VCR2
V-DISC
TV
AUX
CD
TUNER
TAPE
Digital Audio Input Assignment
The four DC-1 digital audio inputs include two coaxial (RCA) and two
optical connectors. For maximum configuration flexibility, each of the four
digital inputs can be assigned to any (or all) of the source selections. No
default assignments are made for the digital inputs.
Video Input Assignment
The analog inputs labeled VCR1, VCR2, V-DISC, TV, and AUX normally
have corresponding video inputs. The analog inputs labeled CD, TUNER,
and TAPE do not have associated video inputs, and default to the video
input VCR1. For maximum configuration flexibility, each of the five video
inputs can be assigned to a different source selector. If the assigned video
input has both S-Video and composite jacks, the S-video signal takes
priority whenever a cable is plugged into the appropriate S-video connec-
tor.
Record/Zone2 Output Blocking
This feature provides feedback protection when selecting a record source.
BLOCKED input sources cannot be selected for the record outputs, thus
disabling the record function. Normally, the record outputs are disabled for
only the TAPE and VCR1 inputs. This sub-menu allows you to alter these
defaults for other configurations.
Remote Trigger Assignment
This menu item assigns the status for the remote trigger voltage that appears
on pin 5 of the Power Control DIN jack on the DC-1 rear panel. +12VDC is
provided for controlling ancillary equipment or functions. This signal can
be assigned as ENABLED or DISABLED for the selected input. The factory
default is ENABLED (high) for A/V inputs and DISABLED (low) for audio
only inputs. (+5VDC is available via internal jumper. Contact your dealer
or Lexicon Customer Service to perform this change.)
Base Version THX Version
PRO LOGIC THX CINEMA
PRO LOGIC PRO LOGIC
PRO LOGIC THX CINEMA
TV MATRIX TV MATRIX
PARTY PARTY
MUSIC LOGIC MUSIC SURROUND
NIGHTCLUB CONCERT HALL
CHURCH CHURCH
Installation and
Calibration
NOTE: Some laser discs do not
contain digital audio tracks. You
will not hear audio when playing
these discs if you have selected a
digital input as the V-DISC source.
NOTE: S-Video input signals will be
output on both the composite and
S-Video jacks. The reverse, how-
ever, is not true. If you are only
connecting to the monitor via the
S-Video connector, composite video
only sources will not be displayed.
21