Advertisement
DY: Adjusting this value will set the luminance change threshold for switching modes.
DC: Adjusting this value will set the chrominance change threshold for switching modes.
Noise Reduction Threshold
If you choose 2D+Noise Reduction Mode in Y/C Separation Mode, here you can change
when Noise Reduction Mode is activated.
Y Noise: Adjusting this value will set the luminance change threshold for activating Noise
Reduction Mode.
C Noise: Adjusting this value will set the chrominance change threshold for activating Noise
Reduction Mode.
Signal Status
Here are three fields to show signal status. No adjustments can be made here.
Noise Level: This field shows the ratio of normal signal and noise signal.
WCV-ID Decoding Result: This field shows if your TV signal includes WCV-ID. This ID
signal is used in Japan only. This information is not normally used by end-users.
ID-1Decoding Result: This field shows if your TV signal includes ID-1. This ID signal
depends on local TV provider. This information is not normally used by end-users.
Saving Your Settings
Changes made on this dialog do not take effect until you press the OK button.
After setting your choices, press OK will apply the parameters to process your video
immediately.
If you wish to use the default settings, press the Default button to reset the parameters.
Then press OK to apply the default settings immediately.
Press the Cancel button to undo any changes and return to the Y/C Separation tab page.
Benefits of Y/C Separation
The following page graphically explain the benefits of Y/C Separation. Please look closely.
These pictures were shot at the Taichung Scientific Museum in Taiwan.
6
Advertisement
