Software Installation - COMPRO M3F - STARTUP Manual

Software Installation

After installing the PCI card and cables in your computer, you should restart it
and follow these steps to install the software.
Step 1. After restarting, Windows will detect your VideoMate Vista M3F/M5F
PCI card and start the Add/Remove Hardware Wizard, prompting you
to install the VideoMate Vista M3F/M5F PCI card drivers. Please
press Cancel and go to the next step.
Step 2. Insert the installation CD into your CD drive. If you have Autorun
enabled, the installer will start automatically. (If Autorun is disabled,
double-click on "setup.exe" on the installation CD.) Compro
recommends you choose Complete to install all necessary software
(VideoMate Vista M3F/M5F drivers, ComproDTV 4, and ComproFM 2)
or choose Custom to install selected item by item. (We also provide
the DiecrtX 9 and Acrobat Reader 6.0 software on the installation CD;
you can browse the CD folder and install them by your need.
Step 3. Press Next to install ComproDTV 4, Windows Media Format 9 Series
Runtime
Step 4. After each program is successfully installed, press Finish to proceed.
Step 5. When installation completes, press Finish to restart computer.
Step 6. When computer is restarted, please start up ComproDTV 4. Select
"VideoMate TV Capture"
for the country selection and then press OK.
Step 7. It will ask you if you want to scan channels. Please select OK to start
scanning. After channel scan is finished, please press OK and you are
ready to enjoy.
12
for Video Device. Also choose your country