Table of Contents
Advertisement
Make sure there is no other device using the same IRQ
as VideoMate TV card.
If some devices are sharing the same IRQ, remove the
other PCI devices and move the TV tuner card to the
fourth PCI slot away from the AGP slot, if possible.
Then reinstall the TV card drivers. This usually solves
the problem.
Try running ComproPVR again.
If the problem persists, move the PCI TV Tuner card to
another PCI slot. Make sure the PCI TV card is using an
independent IRQ by checking Windows Device
Manager.
After you can successfully use ComproPVR, install the
other PCI devices one at a time. Restart your system
and test ComproPVR after installing each card.
Networking, sound, and SCSI cards need IRQs.If they
use the same IRQ, you may encounter a similar
problem.
Audio OK / No Video
The main reason for this problem usually is the result of
an IRQ conflict. Please see Error Code: 0x1000006,
above, to solve it.
Video OK / No Audio
If you can view the TV picture but get no audio, you
should check the following:
Check the Windows Volume Control dialog for muted
sound or volume levels that are too low. (Double-click on
the speaker icon in the system tray to see the Volume
Control dialog.)
Troubleshooting
Note
49
Advertisement
Table of Contents
