COMPRO COMPROFM Manual page 14

Follow these steps to customize and configure your
channel list.
Autoscan
The first time you start ComproFM, Autoscan will
automatically search for all available FM stations.
1. The number of scanned stations varies according to
the quality of reception and your country settings.
2. You can interrupt the scanning process by pressing
the Stop button.
3. When Autoscan is finished, detected stations are
automatically enabled and marked with a check mark.
stations, where a valid signal could not be
detected, are disabled and marked with a blank.
After you are finished scanning for available channels, you
may select OK to return to the display window, or
customize the channel list according to your preferences,
as described below.
You can rescan later by pressing the Autoscan button.
Naming Stations
You can customize the station names by following these
steps.
Step1. Double-click on the Description field of the station
you wish to rename.
Step2. Type a new name in the text box.
Step3. Repeat steps 1 through 2 for any other channels
you wish to rename.
Step4. Click OK to confirm your changes.
Set Mem+
During the Autoscan process, ComproFM automatically
ComproFM User Interface
11