Drum Machine; Factory Reset - DigiTech RP70 Owner's Manual

Drum Machine

The RP70 features a built-in drum machine, which is enabled by pressing the Drums button.
Select patterns, tempo, and level with the Edit Up/Down buttons. Change their values with the
Value Up/Down buttons. The drum machine has the following parameters
Drum Patterns
Drum Tempo
Drum Level
Drum machine settings are globally set and not individually stored with each of the RP70's user
presets.

Factory Reset

This function resets the RP70 to its original factory settings. This procedure erases all custom
User presets.
ATTENTION: Performing this function will erase all user-programmed data. All such
data will be lost forever! Be sure you want to erase the memory and return the RP70
to its factory default state before continuing with this procedure.
The procedure for performing a Factory Reset is as follows:
1. Press and hold the Store button while powering up the RP70.
2. When the display prompts you with FR, release the Store button.
3. Press and hold the Store button for 3 seconds until RS appears in the display and release. The
Factory Reset procedure takes approximately 10 seconds.
34
1-40
1-99 (equivalent of 40 – 240BPM)
0-99