DigiTech ACCESS Manual page 7

1 2 3
Input Level Knob adjusts the input level for the microphone and line inputs.
The Signal LED guides you to an optimal level setting. The LED lights in three colors.
Green is displayed when ACCESS can recognize the pitch of your voice
Orange is displayed when ACCESS is generating optimal signal to noise.
Red is displayed when ACCESS is just below clipping-causing ugly digital distortion
4 5 6
Line Input accepts mono line level audio from an external source. This jack overrides
the front panel MIC jack.
AUX Input to Reverb bypasses the harmony processing and routes the AUX signal
directly to the reverb effect. This feature allows you to 'borrow' ACCESS' reverb effect
for other instruments that don't need harmonies. The input accepts mono line level
audio from an external source.
Left and Right Outputs are the main mix outputs. The outputs have a selectable output
level using the level switch beside the outputs - +4dBu or -10dBu. Use the switch to
match the output of ACCESS to your mixer. For mono output use the left output on its
own.
MIDI thru/out/in are used to control ACCESS with an external MIDI device. MIDI IN
receives MIDI information. MIDI THRU transmits an exact copy of any MIDI informa-
tion received at the MIDI IN.
Footswitch input is used to connect a Digitech FS-300 footswitch to provide remote
control of Bypass, Reverb on/off, and 'ALTernate' Key. See page18 for more informa-
tion).
Power input is used only with a Harman Pro Group PS750 9.75V AC, 820mA power
adapter supplied with the unit.
5