BenQ FP202W V2 User Manual page 9

4. Route the cables via the cable clip.
Release the cable retaining clip by squeezing the clip
inwards as illustrated. Position the cables together and
reinsert the clip over them to retain the cables neatly in
place behind the monitor stand.
5. Connect-to and turn-on the power.
Plug the other end of the power cord into a power point
and turn it on.
Turn on the monitor by pressing the power button located
at the top of the row of buttons on the right edge of the
monitor.
Turn on the computer too, and follow the instructions in
Section 4:
Getting the most from your BenQ monitor
to install the monitor software.
on page11
9 How to install your monitor hardware