Getting Help; Refreshing The Gui Pages; Approved Vendor List For Drives - Linksys NSS6000 Series Administrator's Manual

Introduction

Approved Vendor List for Drives

Approved Vendor List for Drives
Linksys Small Business NSS4000 and NSS6000 Series Network Storage System Administration Guide

Getting Help

There are two buttons on the NSS configuration interface window that you can
click to access help:
•
From the Manager Menu click Help to display the full online Administrator
Guide. Use the navigation tools within the help to find information for your
chosen topic.
•
A context-sensitive help button appears in the upper-right corner of the
topic page. Click it to display help on the specific configuration area. For
example, if the current configuration topic is about the status of your disk
drives, click the Help button for information about the details that appear on
the status page.

Refreshing the GUI Pages

Although certain GUI pages automatically refresh at a preselected time interval,
some pages do not refresh until they are reselected. The best way to manually
refresh a GUI page is to reselect it through the options in the Manager Menu on
the left side of the GUI window. For example, to refresh the NTP Configuration
page, from the Manager Menu, click Admin and then click Time. Do not use the
Refresh button on the Web browser toolbar as this can cause data issues.
If you are purchasing disk drives to install in the NSS, see the Approved Vendor
List at http://www.cisco.com/support
When you select a disk drive, consider the type of RAID levels required to service
your business needs. For example, if you are creating a RAID (versus a JBOD),
make sure that each of the disks used in the array have the same disk capacity.
The RAID is built using the capacity of the smallest disk in the array.
for a list of recommended disk drives.
1
4