Select Input Source - Vizio SV421XVT1A User Manual

VIZIO SV421XVT & SV471XVT User Manual
Select In put Source
Select the I nput Source for the HDTV by press
the INPUT b utton on the remote control. Pre
this button w ill cycle you throu
options: TV, AV1, AV2, Component1, Co
RGB, HDMI1, HDMI2, HDMI3, and HDMI 4.
Turn on your Cable Box, VCR, External TV Tun
Satellite Re ceiver and you will see a picture on
HDTV. If there is no picture, make sure you have
selected the correct input on the HDTV.
If the selected input is RF, set the HDTV
which has been selected on the ba
plea e refer to Owner or User's Manual of such equipment for details. s
Note: Your HDT V will display the television station
tuner, or satellit e receiver. Use the remote control th
channels. If the service being used is the on
different (distan t) rooms, then scanning chann
selected varies from provider to provider.
w hen using your HDTV. Some examples of these channels are 105, 106, 115, and 116.
ing
ssing
gh the following
mponent2,
er or
your
to either Channel 3 or Channel 4 matching the channel
ck of the VCR, Cable Box, External TV Tuner or Satellite Receiver;
or program selected by the cable box, VCR, external
at came with that component to change programs or
e which setup includes a box with two outputs for two
els will help you to find the signal. The channel to be
You may have to call your provider to get the specific channel
36
www.VIZIO.com