Table of Contents
Advertisement
Available languages
Available languages
the SET key. Then press the „ZERO" key for
more than 3 seconds.
The LED will flash twice and then all the codes
saved in the remote control unit are deleted.
F. Write-protection of device codes:
To protect the device codes from being inad-
vertently overwritten / deleted, you should
carry out the following:
1. Press the device group key (TV), press and
hold down the SET key and press the „7"
key on the numerical block. Then release
the two keys, the LED will flash twice and
the code is then protected from being over-
written / deleted.
2. To cancel write protection, press the SET
key and hold it down, then activate the „8"
key , the LED flashes twice and the protec-
tion has been cancelled.
G.
On Screen Menu Control
Your new remote control is preprogrammed
to operate the menu -only if your device is
equiped with such on screen menu function
of your devices (TV, VCR, DVD, SAT) Press
the [MENU] key on the remote control and the
menu comes on. The cursor keys enable you to
scroll the menu. The [OK] key is to confirm the
menu.
Write down the 3-digit codes needed to control your personal devices below:
TV
DVD
H.
The colour / brightness, bass and treble of your
televisions can be changed via the on screen
menu control function (see above).
Service and warranty
Your new remote control is preprogrammed to
control all basic functions of the original remote
control. This means that the installation of new
channels to your television can only be operated
via the on-screen-menu function (if available at
your television).
For service and warranty claims, please con-
tact:
Service Center:
European Distribution Centre
Londoner Strasse 11
D-48455 Gildehaus
Germany
E-Mail:
Info@SupportPlus.org
Tel. nat./internat.:
00800 77 77 88 99
Device Brand Code List
The Device Brand Code List is printed in the
back of this user`s manual.
SAT
VCR TUNER
7
Colour / brightness, Bass / Treble etc.
CD
TAPE
AUX
Hide quick links:
Advertisement
Table of Contents
