Pc Function - Coby TFTV1904 Instruction Manual

PC Function

You can use the unit's TFT LCD as your computer's monitor.
1. Shut down both units and connect the VGA jack and PC Audio In jack. See the "Cable Connection"
section.
2. Turn on the units and press the MODE button to select VGA
PC Setup Menu
Various features can be preset through the PC menu.
• Press the MENU button to display the PC menu. PC setup menu consists of PICTURE, AUDIO, TIME as
well as SETUP.
• Press the left/right direction button to select the desired sub-menu, press OK to enter.
While working with the menu
1. Press the up/down direction buttons to select the desired item.
2. Press the left/right direction button to adjust.
3. Press MENU to exit/back up the menu.
NOTE: Please see the TV section for menu descriptions
Adjust the PC Screen
Upon switching to the PC mode, the moniter will be automatically regulated for a
proper functioning. If the result is not up to your expectation, please perform the
following steps to adjust the screen manually .
1. Enter the "Advanced" sub-menu from the SETUP menu, select "Auto" and
press the left/right direction button to adjust the monitor automatically.
2. Or if you still have problem with the monitor after, adjust "H-Pos", "V-Pos",
"Clock" as well as "Phase" accordingly under the SETUP menu.
PC Function
13