Connecting To A Computer; Using The Cradle - Dell Axim X30 System Information Manual

If the main battery is critically low, the device enters "deep sleep" mode and
the device is powered off.
To recover from a critically low battery:
1
Plug in the AC adapter or replace the main battery with a
charged battery.
2
Press the power button to start the device.
If you remove the main battery, the internal backup battery can last for up to
30 minutes in "deep sleep" mode. Do not remove the main battery if the
backup battery power is low.
With normal use, the device turns off if the device is left unused for a user-
defined period of time. See your Owner's Manual for information about
Power to set the amount of time that the device can remain idle before it
turns off.

Connecting to a Computer

CAUTION:
follow the safety instructions on page 7.
You can connect your device to a computer either directly with a cradle or
with a sync cable. When you connect your device to a computer, you can
perform the following tasks:
Add programs to your device. See your Owner's Manual for
•
more information.
• Synchronize data on your device with data on your computer.
For information about synchronizing your data, see the following resources:
• "Using Microsoft
• ActiveSync Help on your computer
• ActiveSync Help on your device

Using the Cradle

NOTE:
Depending on the configuration of your device, the cradle is optional.
Before performing any of the procedures in this section, read and
®
ActiveSync
®"
in your Owner's Manual.
System Information Guide
17