Fully Automatic Wireless Flash - Canon 580EX - Speedlite II - Hot-shoe clip-on Flash Instruction Manual

Fully Automatic Wireless Fish
This method has all the Speedlites fire at the same clash output with E-TTL Il
autaflash controlling the total flash output.
I OFF
SLAVE,
MASTER
TL IM Zoom 24 ,
OFF = SLAVE
....
MASTER
m Zoom 2`1-1
~T--
~ETTL ru] Zoom C~4mm
A
Set the camera-attached 580E7( as
the master unit .
a Set the wireless selector to <MASTER> .
Set the sl a v e 580 EX Speed lites(s)
as the slave unit(s).
0 Set the wireless selector to <SLAVE> .
Check the communication channel.
~ If the master unit and slave unit(s) areset
[a a different channel, set them all to the
same channel [p.37].
Position the camera and 5peedlites
as desired .
~ Position the Speedlites within the range
shown on the next page.
Set the master unit's flash mode to
<ET7L> .
9 The slave unit(s) will also be automatically
set to <ETTL> .
16
i-
2/21
Check that tie flash is ready .
r When the slave unit is ready to fire, the AF-
assist beam will blink once each second .
34