Page 3
Congratulations and thank you for purchasing the innovative TuneCast Auto from Belkin. This product is designed to power, charge, and transmit audio from your iPod to your car stereo. Please review this User Manual carefully, so that you can be sure you’ll...
Setup Instructions 1. For AUDIO and POWER: Plug the dock connector into your iPod and the cigarette-lighter adapter into your car’s cigarette-lighter outlet. The Auto ON feature will power on the TuneCast Auto automatically when it detects an audio signal from the iPod. Note: To conserve power, the TuneCast Auto automatically turns off when there is no input audio signal for approximately 30 seconds.
Page 5
Setup Instructions 6. Your TuneCast Auto can memorize up to two different frequencies so you can recall them quickly later. a. Select the desired frequency using the or buttons. b. Press and hold the MI or MII button for two seconds. When the MI or MII icon blinks, release the button.
Page 6
Information FCC Statement NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Belkin Corporation warrants this product against defects in materials and workmanship for its warranty period. If a defect is discovered, Belkin will, at its option, repair or replace the product at no charge provided it is returned during the warranty period, with transportation charges prepaid, to the authorized Belkin dealer from whom you purchased the product.