Multi-Prop Decoder
MPDX-1
I
NSTRUCTION
Applicable systems;
14MZ system/FX-40 system
Connections and Name of Each Part of the MPDX-1
Servo output connectors (1~8)
Monitor LED
Rotary switch
Input connector
channel of the receiver.
Mini screwdriver
M
ANUAL
Before using your new MPDX-1, please read this manual thor-
oughly and use the system properly and safely. After reading this
manual, store it in a safe place.
Thank you for purchasing a MPDX-1 Multi-Prop Decoder.
The MPDX-1 connects to the receiver output of a 14MZ or FX-40
System and expands the signal of one channel to 8 channels.
Features
• No part of this manual may be reproduced in any form without prior
permission.
• The contents of this manual are subject to change without prior notice.
• This manual has been carefully written. Please write to Futaba if you
External battery connector
(EXT.BATT)
INC/FS push switch
DEC/HOLD push switch
Connections
1
Connect the input connector to the receiver multi-
prop channel.
2
Connect the servos to the output connectors (1~8).
3
Connect a 4.8V battery to the external battery
connector (EXT.BATT).
Note: However, when sharing the power source with the
receiver, connect the shorting pins.
CAUTION
When the number of servos is large, we recom-
mend the use of a separate power supply.
- 1 -
1M23N16801