changes caused by camber operation can be
corrected.
menu and access the setup screen
shown below by touching the RTN
button.
and return to the Model
menu by touching the
RTN button.
setting
cut switch
adjustment
adjustment
adjustment
88
[Corresponding model type]: Airplane/glider, 2 ailerons or more
elevator servos can be adjusted. When the mixing
direction is reversed by the linkage, adjustments
can be made by changing the mixing rate
polarity (+ or -).
setting a switch. (Always ON at [--] setting)
can turn OFF the delay function can be set.
*The display screen is an example. The actual
screen depends on the model type.
<SensorTouch™>
Scrolling