Adjusting Stitch Length; Adjusting Needle Position - ELNA 5200 Instruction Manual

1.0 2.2
0.0 3.5

Adjusting Stitch Length

When you activate the stitch length mode, the stitch
length can be set between 1.0 and 5.0.
Press the mode key
adjustment (the bottom green light turns on).
The preset value 2.2 will be indicated.
Press the plus
Press the minus
* The reverse stitch length cannot be set longer than
2.5.
5.0

Adjusting Needle Position

When you activate the stitch width mode, the needle
position can be set between 0.0 and 5.0.
Press the mode key
adjustment (the middle green light turns on).
The preset value 3.5 will be indicated.
Press the plus
Press the minus
The following stitches 01, 02, 03, 04, 05 and 07 have
variable needle position:
7.0
32
to activate stitch length
key to lengthen the stitch length.
key to shorten the stitch length.
to activate stitch width
key to move needle right.
key to move needle left.