Getting Started With Penpartner; System Requirements; Installiing The Penparner Driver Software - Wacom PENPARTNER Quick Start Manual

Getting Started with PenPartner

The WACOM Tablet Driver CD contains the installation software
and the Readme file. Some configurations may also contain some
additional application software.
uide
UM-0295_PenPartner.indd 3

System Requirements

Windows ® 98, ME, 2000 or XP, IBM-compatible PC (Pentium 200 or
higher), 64 MB RAM,24 bit color display (800x600 or greater), USB port,
CD-ROM drive.

Installiing the PenParner Driver software

1. Insert the WACOM Tablet Driver CD into your computer's CD-ROM
drive.The Wacom Pen Tablet software installer menu should utomatically
display. If the menu does not display, double-click on the "INSTALL"
icon (located on the CD).
2. Click on the "Install Tablet" button and follow the prompts to connect
your tablet hardware and install the driver software.
for Windows 98:
Note
You will occasionally be asked to insert the Windows 98 CD. If
this happens, click on OK and enter the path for theWindows
CAB files (for example d:¥win98). If Windows 98 was already pre-
installed when you bought your computer, load the Windows 98
CAB files from the hard disk or from the system recovery CD.
3
04.10.8 2:31:12 PM