Wacom INTUOS 2 - FOR MAC User Manual page 118

• Then press the tool's eraser to the tablet—the S
(P should change from approximately 0% with no pressure applied to approximately 100%
RESSURE
when full pressure is applied.)
• For the airbrush, move the fingerwheel forward—the W
approximately 0 when the fingerwheel is all the way forward. Move the fingerwheel backward—the
W value should increase to approximately 1000 when the fingerwheel is all the way back.
HEEL
4. Test tilt for the x-axis by moving the Intuos2 Pen or Airbrush from a vertical position toward the right;
the X T value should change from approximately 0 to +60 (0 to +50 for Intuos2 4x5/A6 tablets).
ILT
Now move the tool to the left of vertical; the X T
(0 to -50 for Intuos2 4x5/A6 tablets).
5. Test tilt for the y-axis by moving the Intuos2 Pen or Airbrush from a vertical position toward the bottom
of the tablet; the Y T
tablets). Now move the tool toward the top of the tablet; the Y T
approximately 0 to -60 (0 to -50 for Intuos2 4x5/A6 tablets).
6. When you are done, click on the C
value should change from approximately 0 to +60 (0 to +50 for Intuos2 4x5/A6
ILT
button to exit the dialog box.
LOSE
Contents
Index
state and P
WITCHES
value should decrease to a value of
HEEL
value should change from approximately 0 to -60
ILT
value should change from
ILT
value will change.
RESSURE
HAVING TROUBLE?
Page 118