Customizing The Side Switch - Wacom GRAPHIRE CTE-630BT User Manual

CUSTOMIZING THE SIDE SWITCH

Select the P tab to change the functions assigned to the side switch of your Graphire pen.
EN
The DuoSwitch can be set to simulate a variety of mouse functions; the pull-down menus enable you to
choose the function that will be performed.
Select the function to perform when
pressing the upper or lower side switch.
When you bring the pen tip within 5 mm
(0.20 inch) of the tablet surface without
touching the tablet and press the upper or
lower side switch, the selected function
occurs.
Hint: To make double-clicking easier, set
the side switch to double-click automatically
by selecting D C
OUBLE LICK
Contents
.
Contents
Index
Note: You can change the S
the way you like to use the pen when making
right-clicks or other click functions. Click on the
A
DVANCED
• Select H
without touching the pen tip to the tablet
surface.
• When C
press the pen button and then touch the pen
tip to the tablet surface in order to perform a
click function. C
precise placement of your click functions.
Index
S
IDE WITCH
button. In the dialog box that appears:
C to perform click functions
OVER LICK
& T is selected, you must first
LICK AP
& T enables the
LICK AP
32
M for
ODE
32