NETGEAR DG834G - 54 Mbps Wireless ADSL Firewall Router Reference Manual page 81

Table 6-1. Menu 3.2 - Router Status Fields
Field
Account Name
Firmware Version
ADSL Port
MAC Address
IP Address
DHCP
IP Subnet Mask
Domain Name Server (DNS) This field displays the DNS Server IP addresses being used by the
LAN Port
MAC Address
IP Address
DHCP
IP Subnet Mask
Modem
ADSL Firmware Version
Modem Status
Downstream Speed
Upstream Speed
VPI
VCI
Managing Your Network
Reference Manual for the 54 Mbps Wireless ADSL Firewall Router DG834G
Description
The Host Name assigned to the router in the Basic Settings menu.
This field displays the router firmware version.
These parameters apply to the Internet (ADSL) port of the router.
This field displays the Ethernet MAC address being used by the Internet
(ADSL) port of the router.
This field displays the IP address being used by the Internet (ADSL) port
of the router. If no address is shown, the router cannot connect to the
Internet.
If None, the router will use a fixed IP address on the ADSL.
If Client, the router will obtain an IP address dynamically from the ISP
This field displays the IP Subnet Mask being used by the Internet
(ADSL) port of the router.
router. These addresses are usually obtained dynamically from the ISP.
These parameters apply to the Local (ADSL) port of the router.
This field displays the Ethernet MAC address being used by the Local
(LAN) port of the router.
This field displays the IP address being used by the Local (LAN) port of
the router. The default is 192.168.0.1
If OFF, the router will not assign IP addresses to computers on the LAN.
If ON, the router will assign IP addresses to computers on the LAN.
This field displays the IP Subnet Mask being used by the Local (LAN)
port of the router. The default is 255.255.255.0.
These parameters apply to the Local (WAN) port of the router.
The version of the firmware.
The connection status of the modem.
The speed at which the modem is receiving data from the ADSL line.
The speed at which the modem is transmitting data to the ADSL line.
The Virtual Path Identifier setting.
The Virtual Channel Identifier setting.
6-5