Intel 512AN_MMW User Manual page 26

8. At the enrollee, click Next. At the enrollee, you are notified when you have Successfully connected to
<name of wireless network>. Click Finish.
Add an Enrollee to an Existing WiFi Network at the Registrar
This following procedure lets you add an enrollee to an existing WiFi network, where the access point is already
configured and the registrar has already joined the AP.
NOTE: This process assumes that the registrar is running the WiFi connection utility; the process and windows
displayed at the registrar may be different for software from other vendors.
1. Get the Device Password for the enrollee computer that you want to add to the network.
2. At the task tray icon for the WiFi connection utility, right-click and select Add New Device.
3. Perform steps 5 through 8 of the procedure
Other Wireless Managers
If the WiFi connection utility detects another software application trying to communicate with the wireless device,
you are notified of this behavior.
Microsoft Windows* XP Wireless Zero Configuration
To switch from the Intel® PROSet/Wireless WiFi Connection Utility to the Microsoft Windows* XP Wireless Zero
Configuration, perform these steps:
1. At the Intel® PROSet/Wireless WiFi Connection Utility main window, under the Advanced menu, select Use
Windows to Manage WiFi.
2. At the prompt window, you are queried: Do you want Windows to manage your WiFi network connections?
Click Yes.
3. Click Close to close the Intel® PROSet/Wireless WiFi Connection Utility.
4. Right-click on the taskbar icon and select Open Wireless Zero Configuration.
NOTE: Any wireless profiles created in the WiFi connection utility are not visible in Microsoft Windows*
XP Wireless Zero Configuration. If you want to use your Intel wireless profiles, click Enable WiFi
control on the main window.
Intel® PROSet/Wireless WiFi Connection Utility User's Guide
Connect an Enrollee to a Network or Access Point.