Ap Configuration - Cisco 1230AG - Aironet - Wireless Access Point Configuration Manual

Section 1: SVP

AP Configuration

PN: 1725-36192-001_H
Cisco Wireless LAN Controllers with 1100, 1130, 1140, 1200, 1230, 1240, 1250 APs
2. In the navigation pane, click
addresses are assigned to the interfaces.
3. Under
Interface Name
4. Under
DHCP Information
.
Server
5. Repeat this step for the
6. Click the button and save the changes.
Apply
All handsets operating on a given AP radio must have the same
QoS setting. All APs supporting the handsets must be configured to
enable the corresponding features.
1. Power-on and connect the APs to the network. Wait a few minutes
for the APs to find the controller.
2. Verify the APs are associated to the WLC.
3. From the main menu, click
. Verify that the proper IP
Interfaces
click .
management
, enter the IP address of the
interface.
ap-manager
.
Monitor
Primary DHCP
11