Advanced; Icr And Ir - D-Link DCS-2310L User Manual

Section 4: Configuration
Here you can configure the ICR and IR settings. An IR(Infrared) Cut-Removable(ICR) filter can be disengaged for increased sensitivity in low light
environments.
Automatic:
The Day/Night mode is set automatically. Generally, the
camera uses Day mode and switches to Night mode when
needed.
Day Mode:
Day mode enables the IR Cut Filter.
Night Mode:
Night mode disables the IR Cut Filter.
Schedule Mode:
Set up the Day/Night mode using a schedule. The camera
will enter Day mode at the starting time and return to
Night mode at the ending time.
IR Light Control:
The camera can enable or disable the IR (infrared) light
according to your preferences. This setting provides
additional controls depending on your specific application.
Off:
The IR light will always be off.
On:
The IR light will always be on.
Sync:
The IR light will turn on when the ICR sensor is on.
Schedule:
The IR light will turn on or off according to the schedule
that you specify below.
D-Link DCS-2310L User Manual

Advanced

ICR and IR

70