Canon Vb-C60 - Ptz Network Camera Setup Manual page 25

Click .
OK
9
Now, the camera server has been registered. The registered camera server
information is displayed in the right list of the screen.
Repeat step 6 to 9 to register other camera servers, if necessary.
10
/
"Chapter 4 Register Camera Server and Set Recording Schedule" in
Reference
Administrator's Manual
System Installation Example
Select a camera server to register, and then
7
click Add Camera Server.
The Add Camera Server dialog box is
displayed.
Configure the following settings in the Add
8
Camera Server dialog box.
• Enter the "User Name" and "Password", and
then click Connect. Make sure that the live
view is displayed in the Preview window.
• Enter the "Camera Name", and select the
"Location" and "Zone" of the camera.
• Click Start Control, and adjust the viewing
angle of the camera.
Check that all of the camera servers that you
11
are using have been registered successfully in
the right list of the screen.
Click
Save Changes
12
The registered camera information is saved.
.
2
25