Software Installation; Ÿ Ÿ Microsoft Windows ® 9 X - Nvidia 9600GSO - PV-T96O-SDFH-OC GeForce - SLI READY User Manual

Software Installation

Software Installation
ÿ
Microsoft Windows ® 9x
New system installation:
When the Microsoft Windows® PnP(Plug-and-Play)
detected on the new hardware, click on [Cancel] button
to allow the operating system starting with the VGA or
SVGA driver. Do Not placed the 3DForce2 MX'CD into
the CD ROM drive. After Windows®9x desktop loaded
completely, following the video driver installation
procedure below.
1. Insert the software' CD into your CD-ROM drive
(e.g. D: or E:).
2. Autorun file pops up "Welcome" screen from
software' CD.
3. Click on the "Display Driver" selection bar.
4. Switch to "Settings" tab, then click on " Advance"
button.
5. Tab on "Adapter" screen, if there is any.
6. Click on "Change", then "Have Disk".
7. Browse to "X:\MX\Win9x\Jatonagp.INF" (X is the
letter of your CD-ROM drive; typically, D: or E:,
etc.), and click OK.
8. The display device selected "3DForce2 MX
series, nVIDIA GeForce2 MX", then press on
OK button.
9. Close and apply to finish AGP's display driver
installation.
10. Restart Windows to complete installation.
11