Introduction; Inserting/Removing Cf Memory Card/Lan Card - JVC GY-DV300U - 1/3" 3-ccd Dv Camcorder User Manual

Introduction

KA-DV300
EJECT button
ACCESS lamp
Caution
● Make sure the power of GY-DV300 is off when inserting/removing a CF memory card/LAN card. Inserting/removing a card with
the unit power on may damage the data storage section of the CF memory card or the card itself.
● Do not use the wireless LAN card continuously for more than 48 hours.
Inserting card
1.
Turn off the GY-DV300 power.
2.
Insert a card into the KA-DV300 card slot.
3.
Turn on the GY-DV300 power.
LCD screen
Removing card
\ Check to make sure the ACCESS lamp of KA-DV300 is off.
The ACCESS lamp will light when the card is in operation.
1.
Turn off the GY-DV300 power.
2.
Press the EJECT button of KA-DV300 and remove the card.
Card slot
Card status display
C F
: No card
e
: LAN card
C F
: CF memory card

Inserting/removing CF memory card/LAN card

● The KA-DV300 accepts the following cards for which operation has been confirmed:
Operating voltage
Current consumption
• Wired LAN-card
US: E A 2 9 0 0 - 1 1 7 ( R ev i s i o n C ) ( N a m e o f m a n u fa c t u r e r : S o ck e t
Communications, Inc)
Europe:E A 2 9 0 3 - 1 6 2 ( R ev i s i o n C ) ( N a m e o f m a n u fa c t u r e r : S o ck e t
Communications, Inc)
Asia: E A 2 9 0 6 - 1 9 4 ( R ev i s i o n C ) ( N a m e o f m a n u fa c t u r e r : S o ck e t
Communications, Inc)
• Wireless LAN-card
TEW-PC16 (firmware version 0.8.3 or later) (Name of manufacturer: TRENDware)
WFC11 (Name of manufacturer: LINKSYS)
• CF (Compact Flash) card
SDCFB-16-801 ~ SDCFB-256-801 (Name of manufacturer: SunDisk)
*1: Use PCMCIA card TYPE 1 or TYPE 2 adapter
*2: Use PCMCIA card TYPE 2 adapter
CF Card adapter/LAN card
CF memory card
● Card status according to the inserted card type is displayed on
the LCD screen/viewfinder screen. ( page 4)
Memo
When turning the power on, the card status
display shown on left will flash during initial-
ization.
3
3.3 V
Max. 300 mA
*1
*1
*1
*2
*1