Figure 91. Removing Drive Carrier From Hot Swap Drive Cage; Figure 92. Removing Hard Drive From Drive Carrier - Intel SC5299WS User Manual

2. Press in on the green latch at the front of the drive carrier (see letter "A" in the
following figure). Pull out on the black lever (see letter "B") to slide the drive carrier
from the hot swap drive cage.
3. Remove the four screws that attach the hard drive to the drive carrier. Lift the drive
from the carrier. Store the old drive in an anti-static bag.
Intel® Entry Server Chassis SC5299-E DP/WS/BRP User Guide
Hot Swap Drive Cage Upgrade Install Instructions (optional)

Figure 91. Removing Drive Carrier from Hot Swap Drive Cage

Figure 92. Removing Hard Drive from Drive Carrier

A
B
AF000312
TP01714
71